mac-auth-clients
Displays MAC authenticated
clients
Supported on the following devices:
- Access Points:
AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632,
AP7662, AP8163, AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
show mac-auth-clients [all|interface]
show mac-auth-clients all {on <DEVICE-NAME>}
show mac-auth-clients interface {<INF-NAME>|ge <1-X>|port-channel <1-2>|
xge <1-4>}
Parameters
show mac-auth-clients all {on <DEVICE-NAME>}
| mac-auth-clients |
Displays MAC authenticated clients based on the parameters passed. The options
are: all and interface. |
| all |
Displays MAC authenticated clients for all interfaces |
| on <DEVICE-NAME> |
Optional. Displays MAC authenticated clients for all interfaces on a specified
device
- <DEVICE-NAME> – Specify
the name of the AP, wireless controller, or service platform.
|
show mac-auth-clients interface {<INF-NAME>|ge <1-X>|port-channel <1-2>|
xge <1-4>}
| mac-auth-clients |
Displays MAC authenticated clients based on the parameters passed. The options
are: all and interface. |
| interface [<INF-NAME>| ge <1-X>| port-channel <1-2>| xge
<1-4>] |
Displays MAC authenticated clients for the specified interface. Select the
interface type from the following options:
- <INF-NAME> – Optional.
Displays MAC authenticated clients for the interface identified by the
<INF-NAME> keyword. Specify the layer 2 (ethernet port) interface name.
- ge <1-X> – Optional.
Displays MAC authenticated clients for the selected GigabitEthernet interface.
Specify the GE interface index from 1 - X. This will vary for different device
types.
- port-channel <1-2> –
Optional. Displays MAC authenticated clients for the selected port channel
interface. Specify the port channel interface index from 1 - 2.
- xge <1-4> – Optional.
Displays MAC authenticated clients for the selected TenGigabitEthernet
interface. Specify the interface index from 1 - 4.
|
| on <DEVICE-NAME> |
Optional. Displays MAC authenticated clients for the specified interface on a
specified device
- <DEVICE-NAME> – Specify
the name of the AP, wireless controller, or service platform.
|
Examples
nx9500-6C8809(config-device-B4-C7-99-22-9D-58)#show mac-auth-clients interface ge 1
-----------------------------------------------
MAC STATE INTERFACE
-----------------------------------------------
12-6C-01-13-fg-21 UP GE1
-----------------------------------------------
Total number of MACs displayed: 0
nx9500-6C8809(config-device-B4-C7-99-22-9D-58)#
